GORE-TEX® products are particularly robust and durable. To make the most of these benefits for as long as possible, regular care of clothing is essential.
This is the only way to ensure that the dry treatment always performs reliably and can optimally protect the ambitious hiker, mountaineer and outdoor enthusiast from adverse weather conditions. This article is dedicated to the cleaning and care of GORE-TEX clothing. You can find an article on the correct care of shoes in separate care instructions.
How to correctly care for GORE-TEX® clothing
In order to avoid unnecessary strain or even damage to the fabric in the washing machine, it is important to close all zips. This applies to the front zip as well as to all pockets with zips and ventilation zips. You can then put your clothing into the machine without hesitation. The optimum result is achieved at a temperature of 40° C with a little liquid detergent. Nevertheless, the manufacturer’s care instructions should always be followed before washing. After washing, rinse sufficiently clear to remove all detergent residues. Powder detergents, fabric softener, stain remover and bleach should never be used as these can clog and attack the membrane.
In order not to wrinkle the clothes too much, it is best to keep the spin cycle as low as possible. Ideally, you should also avoid washing heavily soiled clothes together. If dry cleaning is required, it is important that this is carried out with a distilled hydrocarbon solution. In addition, before drying a water-repellent dry treatment should be sprayed on.
Drying and ironing clothing
GORE-TEX® is best air-dried. As this is not always easy, particularly in cities where you have a lack of space, you can also use a tumble dryer. The clothes should be dried at a warm temperature. Once dry, put into the dryer again at a low temperature for about 20 minutes on a gentle cycle. This reactivates the water-repellent dry treatment of the fabric and allows it to regain its full protection.
By using the tumble dryer, additional ironing is generally no longer necessary. However, if you haven’t used a tumble dryer, ironing at a low temperature and without steam is recommended. To protect the fabric sufficiently, place a cloth between the clothing and the iron The heat generated by ironing always reactivates the permanent dry treatment (DWR).
The water-repellent dry treatment of the clothing
If the water-repellent dry treatment of the individual garment can no longer be reactivated, it is possible to add additional dry treatment. This is usually available from shops and retailers offering GORE-TEX® garments.
GORE-TEX® gloves – how to care for them properly
Generally, GORE-TEX® gloves can be washed by hand in warm water. For more detailed information, you should also consult the manufacturer’s care instructions. If there is leather on the upper material, make sure to keep these areas free of soap. After washing, press the water from your fingertips to your wrist. Do not wring as this may damage the material!
To dry the gloves, place them or hang them with the fingertips pointing upwards. The gloves can also be tumble-dried at low temperature and steam-ironed warm. As with clothing, it is advisable to place a towel between the outer fabric and the iron.
The correct care and cleaning ensures a long life for GORE-TEX® products
Clothing, shoes, gloves: proper, regular care of individual GORE-TEX® products extends the life of the dry treatment and if necessary, reactivates it. This, in turn, results in more fun off-road and offers adequate protection against wet and cold on a wide range of tours. So after the tour, invest a few more minutes in cleaning so your equipment is ready for the next trip!